What is cabinet hinge made of?

What is cabinet hinge made of? It is the common question that clients asked Kingwen Liang.
Hinge, in the spring kav hinge which Kingwen Liang engaged in, most of them use the cold-rolled steel Q195. About the knowledge of cold-rolled steel, please pay attention to the article below:
The use and classification of cold-rolled steel and cold-rolled coil
Cold-rolled steel, the cold-rolled thin steel is short for the ordinary carbon structure cold-rolled steel, is known as the cold steel, sometimes it will be mistakenly written as cold plate. The cold plate is composed of ordinary carbon structural steel hot-steel,
After further cold-rolled it will become the steel that the thickness is less than 4mm. Since the rolling is at a room temperature, it does not produce iron oxide, so it has high surface quality and high toughness, plus the annealing treatment, the mechanical properties and process performance is better than hot-rolled steel. In many fields, especially in the electrical appliance area, has gradually replaced the hot-rolled steel.
Applicable grades: Q195 Q215 Q235 Q275 SPCC (Japan brand) ST12 (Germany brand)
Symbol:

• Q- The code of common carbon structure steel point (limit), it is the first Chinese alphabet, 195 215 235 255 275- respectively the number of their yield point, unit: MPa (N/mm2). Since Q235 steel is better in the strength, plasticity, toughness and weld ability, can meet the general use demands better, so it is widely used in the area.
• S- For steel, P-For plate, C-For cold and the fourth C-For common
• ST-For steel, 12-for ordinary thin sold-rolled steel

Mark: Dimensional accuracy-Size-Plate Breed Standard
Cold-rolled steel: Steel No. - Technology standard
Samples: B-0.57501500-GB708-88, steel standard No.is Q/BQB402, the grade is SPCC, heat annealing treatment plus formation (S), the central processing state is linen D, surface quality is the FB level trimming (cutting edge is EC, not trimming is EM) steel, thickness is 0.5mm, B-level, width is 1000mm, A-level, length is 2000mm, A-level, roughness accuracy PF, so is marked as :Steel ECQ/BQB 402-SPCC-SD-FB/(0.51000A2000A-PF.A)
Cold-rolled steel: Q225-GB912-89
Main origin: Bao Steel  An Steel  Ben Steel  Wu Steel  Han Steel  Bao Steel  Tang Steel  Lian Steel  Ji Steel and so on.
Ordinary cold-rolled steel: is made up of the ordinary carbon structure. Cabinet hingehas a perfect surface quality, with good punching properties, it requires the cold-rolled and cup test pass, was usually used in the automotive and other industries and coated sheet materials.
High-quality cold-rolled steel: mainly include all kinds of high quality cold-rolled steel; the most commonly used is carbon structural steel, especially deep drawing cold-rolled steel, is made of high quality carbon steel 08A1, the steel surface quality can be divided into three groups: I II III, respectively especially senior, senior and junior surface finishing. By drawing level is divided into ZF HF F grade(stand for Punch drawing the most complex, very complex and the complex parts) , according to the thickness tolerance, is divided into A and B two precision, widely used in automobile and tractor industries
Cold-rolled steel, with smooth surface, fine processing, it is widely used in cars, refrigerators, washing machines and other appliances, industrial equipment and various construction materials. With the development of economics, cold-rolled steel has been called the certain material in the modern society. Classification of cold-rolled products: hot rolled pickling, rolling hard, ordinary cold-rolled, galvanized (galvanized fingerprint resistant, hot dip galvanized), zinc, tin plating, coating, electrical steel (silicon steel) and so on.
Kav hinge is your best choice.

How to choose the bathroom cabinet (about hinge) Original

By Berry

Most of the consumers focus on the style and color of the bathroom cabinet when they choose the cabinet, pays little attention to the selection of cabinet hardware accessories. Actually the accessories is one of the most important part of modern bathroom furniture, it will directly affect the overall level and the function of the bathroom cabinet.

Bathroom cabinet hardware accessories mainly include: hinges, drawer slides, hydraulic and the anchor. Today we mainly discuss how to choose the cupboard door hinges.

Hinge, is an important part of the bathroom cabinet, is most used in the cupboard switching process. At current market, hinge is mainly include: soft close hinge, common hinge, two-way hinge, two-dimensional hinge and three-dimensional hinge by function. By material, hinge mainly include: cold-rolled sheet and stainless steel hinge.

Now there are two kinds of cabinet door hinge: clip on and fixed. The clip-on hinge is divided into base and pedestal two parts, of course, it is easier to install and disassemble for the clip-on hinge. The hinge usually use the two-dimensional and three-dimensional eccentric displacement to adjust , the three-dimensional hinge is of course better. In addition, you should choose the hinge with a hydraulic buffer ,which makes the door is easy to open and closed slowly, so as to ensure the safety and avoid the noise when you close the door, guarantee the life more comfortable and quite.

Actually the most significant part of hinge is the material that made of the hinge , if the material is not good, the door may be dropped out after a period of time. It is better to use the self-closing stainless steel hinges in the bathroom, its thickness and toughness is perfect. Finally, suggest you to choose the hinge which made by brands, it will ensure the high quality and longer service life.

304 Stainless steel hinge

Three-dimensional hydraulic hinge

Attention: please do not reproduce or modify the article without permission. The content of the article is personal opinion only, do not represent the real authority. Go to our website to know more about product information and installation skills

www.chinaslides.com or www.kavhinge.com

QQ:76465132

What is cabinet hinge made of？

What is cabinet hinge made of？

By Kingwen Liang

What is cabinet hinge made of？It is often asked by the clients to Kingwen Liang.

Kitchen Hinge, in the spring furniture hinge industry which Kingwen Liang is engaged in, cold rolled steel Q195 is most used. About the knowledge of the cold rolled steel, please pay attention to the article below

The classification and use of the cold rolled steel and the cold rolled coil

Cold-rolled steel is short for the thin cold-rolled steel which is made from ordinary carbon structural, commonly known as the cold plate. Cold plate is the steel that made up of ordinary carbon structural steel hot-rolled steel belt; the thickness is less than 4mm after further cold rolling. The cold plate has a favorable quality and high precision in size because it is made in the room temperature and would not produce scale, plus with the annealing treatment, the mechanical properties and process performance are better than hot rolled steel, in many fields, especially in home appliance manufacturing areas, has been gradually replace the hot rolled steel.

Applicable grades: Q195 Q215 Q235 Q275 SPCC (Japan brand) ST12 (Germany brand)

Symbol:

1.       Q- The code for the ordinary carbon structural point (limit), it is the first word of Chinese phonetic alphabet. 195 215 235 255 275-represent the number the cold-rolled steel can bear (limit), the unit (MPa ). The Q235 is the best in the strength, plasticity, toughness of the ordinary carbon structural, it can meet the demand of daily use, so the application range is very wide.

2.       S-for steel. P for plate. C for cold-rolled. And the fourth-regular grade C for common.

3.       ST for Steel and the number 12 stand for the ordinary cold-rolled steel.

Mark: size precision-dimensions-plate breed standard

     Cold-rolled steel: Steel-technical condition standard

Mark example: B-0.57501500-GB708-88, Steel, Q/BQB402 Standard, grade (SPCC), annealing heat treatment state plus level(S), table textured D, with central processing status to surface quality level for FB trimming steel; the thickness is 0.5mm, B precision of width 1000mm. a level precision ,length is 2000mm, A level precision ,roughness of PF precision. A, is marked as: steel ECQ/BQB 402-(SPCC)-SD-FB/(A2000A-PF.0.51000A)

Cold-rolled steel: Q225-GB912-89

The main origin: Bao steel, steel, Ben steel, Wu steel, Han steel, Bao steel, Tang steel, Lian steel, Ji steel and so on.

Ordinary cold-rolled steel: This is made up of ordinary carbon structural or low alloy structural. It has a good surface quality and a perfect punching property. It requires passing the cold bending test, which is common used in the automotive industry.

High quality cold-rolled steel: mainly include all kinds of high quality cold-rolled steel; the most commonly used is the carbon structural, especially for deep drawing, which is composed of low carbon cold-rolled steel. According to the surface quality, divided it into three parts: I II III, respectively the special senior, senior and high rough surface, according to the drawing, can be divided into ZF, HF and F, due to the toughness of the steel, can deeply divided into A and B, is widely used in the automobile tractor industry.

Cold-rolled steel: with smoothly surface, excellent in processing, commonly used in the automobile refrigerator washing machine and other home appliance, it is also used in the industrial equipment and all kinds of building material. With the development of economy, the cold-rolled steel is called as the material of modern society.

The classification of cold-rolled product: hot rolled pickling, rolling hard, ordinary cold-rolled, galvanized (galvanized fingerprint resistant, hot dip galvanized), zinc, tin plate, coating, electrical steel (silicon steel ) and so on.